 |
|
|
|
|
 |
|
DGT SERIES DIGITAL WEIGHT TRANSMITTER/INDICATOR DGT SERIES DIGITAL WEIGHT TRANSMITTER/INDICATOR Applications Multipurpose weight transmiiter for panel mounting on DIN bar. Ideal as an independent 4-channel digital junction box, permitting the direct reading and diagnostics of each connected load cell.. The wide range of available interfaces, makes it easy to integrate the weighing with any automation system. CE-M approvable (OIML R-76 / EN 45501).
 | Standard Features - Easy to use 5-key waterproof keyboard.
- Keypad Function:Zeroing, Automatic tare, Presettable tare, printing and/or data transmission, function command, on/off
- Selectable Function: 2 programmable weight thresholds, Weight accumulation, Formula weighing, Counting, Hold, Peak
- Highly efficient red LED display with 6 9-mm digits and 6 LEDs for showing active functions.
- Case for mounting on DIN bar or on the wall.
- 106 x 90 mm size, 58 mm height
- Calibration, Set-Up parameters, configurable from keyboard or from PC with DINI TOOLS V.3.1
- Up to 10.000e or multirange 3 x 3000e @ 0,3 µV/d for CE-M approved legal for trade use (not yet available)
- Up to displayable 300.000e for internal factory use
- Up to 3 signal linearisation points
- Internal resolution up to 3.000.000 points
- A/D 24-bit sigma-delta conversion, up to 200 conv./sec. autoselect
- Manages a scale with 4 channels or a system with up to 24 cells with digital equalisation (6 DGT's in network).
- Connectable with up to 8 analogue load cells with 350 Ohm input resistance.
- From 12 Vdc to 24 Vdc power supply.
|  | I/O Section - RS232/C bidirectional port configurable for connection with external units.
- RS485 bi-directional port configurable for PC, PLC.
- Two 0.1 A 48 Vac / 0.1 A 60 Vdc (NO) relay outputs which may be configured as direct control or upon weight stability, with programmable weight thresholds (disable and enable thresholds)
- 2 configurable optoisolated inputs: 12÷24 Vdc, 5 mA min - 20 mA max
- MODBUS serial protocol (DGT4, DGT4AN)
- With PROFIBUS serial protocol (DGT4PB).
- With 16-bit analogue output 4-20mA / 0-5Vdc / 0-10Vdc at choice; the maximum applicable voltage is 350 Ohm and the minimum applicable voltage resistance is 10 kohm (DGT4AN)
| Models - DGT4:Standard model with 2 inputs, 2 outputs, 1 RS232 bidirectional port and 1 RS485 bidirectional port
- DGT4AN:Standard model with 2 inputs, 2 outputs, 1 RS232 bidirectional port and 1 RS485 bidirectional port and analogue output 4-20Ma / 0-5 Vdc / 0-10 Vdc
- DGT4PB:Standard model with 2 inputs, 2 outputs, 1 RS232 bidirectional port and PROFIBUS
Options/Accessories
- Printer for panel mounting
- Time/Date
- Alibi Memory
More Details: http://www.diniargeo.com/WebDini/Home.asp?Log=True&Lang=2 |
| |
|
| |
|
|
|
|
|
