|
SBK SERIES IP68 STAINLESS STEEL SHEAR BEAM LOAD CELLS SBK SERIES IP68 STAINLESS STEEL SHEAR BEAM LOAD CELLS
Applications
Stainless steel shear beam load cells suitable for building, for example, CE-M approved scales with 4 load cells or for weighing tanks and hoppers with the relevant accessories. C3 PRECISION CLASS;OIML CERTIFICATE AVAILABLE UPON REQUEST;STAINLESS STEEL CONSTRUCTION;IP68 PROTECTION LEVEL;MAX. CAPACITIES FROM 300 TO 2000 kg SHIELDED CONNECTION CABLE
 | Standard Features - Minimum load cell verification interval: Vmin = EMax / 10.000
- Maximum number of verification intervals: nLC = 3000
- Combined error: 0,017% of Full Scale Output (F.S.)
- Full Scale Output: 2mV/V +/- 0.1%
- Temperature effect on zero: 0,0014% /°C
- Temperature effect on full scale output: 0,0014% /°C
- Compensated Temperature Range: -10°C/+40°C
- Operating Temperature Range: -20°C/+60°C
- Creep error after 30 minutes: 0,024% F.S.
- Maximum tolerated excitation voltage: 15 VDC
- Input Resistance: 385 ± 20 Ohm
- Output Resistance: 350 ± 5 Ohm
- Insulation Resistance: >5000 MOhm
- Safe Overload: 150% F.S.
- Ultimate Overload: >200% F.S.
- 6-wire screened cable, 5m long, 5 mm diameter
|  | Models - SBK300 :300 kg
- SBK500 :500 kg
- SBK1000 :1000 kg
- SBK2000 :2000 kg
Options/Accessories - OIML R60 certificate (without surcharge)
- ATEX Certification (with surcharge) :ATEX certification for each load cell
Assembly kit -KSB2:Assembly kit in stainless steel for SBS or SBK shear beam load cells from 250 kg to 2000 kg
-KSB2H:Kit made up of aisi 304 stainless steel jointed upper plate from 250 kg to 2000 kg |
